KLS Gogte Institute of Technology (KLSGIT) is an esteemed educational institution located in Belagavi, Karnataka, India, offering a range of undergraduate and postgraduate programs in various disciplines, including mechanical engineering. The Mechanical Engineering Department at KLSGIT is committed to providing quality education and producing skilled professionals equipped with the knowledge and expertise to meet the demands of the industry. The department is engaged in cutting-edge research activities in various areas of mechanical engineering, including design, manufacturing, materials, and thermal engineering. With state-of-the-art facilities, experienced faculty, and a focus on innovation and industry collaborations, the Mechanical Engineering Department at KLSGIT is a hub for research and development in the field of mechanical engineering.

Research Scholars (completed) in our center:

The department has state-of-the-art laboratory facility. The labs have been modernized to cater to the needs of changing academic curriculum which is in line with the industry needs.The department has a VTU approved R&D Center for pursuing research leading to Masters/Doctorate degree program. Other than standard facilities for the labs in the curriculum, the  following equipments/facilities are available at the Department R&D Center:

a) FFT Analyzer

b) DAQ Systems by NI

c) Computing Facilities

d) All basic labs of Mechanical Engg.

e) ASRS System

f) Profile Projector

g) Tallysurf – Surface Roughness Measuring Instrument

h) Height Master

i) CNC Milling Machine

j) Fanuc Controller

k) Electro Discharge Machine(EDM)

l) Mitutoyo Coordinate Measuring Machine (CMM)

m) Leapfrog – Rapid Prototyping Machine

n) Lathe Tool Dynamometer

o) Metallurgical  Microscope with Image  Analyser

p) Disk Polishing Machine

q) Ultrasonic Tester

r) Flexible Manufacturing System

Research on Passive Magnetic Bearings:

Scope for Research:

Performance analysis of Passive magnetic bearings

Performance analysis of Horizontal and Vertical axis rooftop wind mills with respect to power generation

Research on Passive Magnetic Bearings:

Scope for Research:

Performance analysis of Passive magnetic bearings

Performance analysis of Horizontal and Vertical axis rooftop wind mills with respect to power generation

List of Ongoing /completed Research Projects:

PATENTS OBTAINED

1. Solar powered vird and a nimal repeller for agriculture: Patent Owners : Dr.V.Agalya, Prof.Rayappa, Dr.Kiran, Dr.Adarsh, Prof.Prashant Kakkamari,Dr.Vinayak K., Prof.Shreenidhi, Dr.gangadhar M., Prof.Venkatesh. (3 owners are faculty of GIT: Venkatesh, Shrinidhi, and Prashant)
   • Patent Date: 01/12/2023.
   • Awarded by : Patent Office Journal
   • Application No.202341072022 A

Research Facilities Photos:

RPT System

Books published by Faculty:

National Journal: 

1. Arunkuma P. et.al.,”An Experimental investigation on effects of input parameters on the responses in Electric Discharge Machining process”,published in Manufacturing Technology Today, CMTI, Volume 8, Issue 4, April 2009.
2. Arunkuma P. et.al., “Shop Floor Control Using A Computer Aided System”, Journal of Manufacturing Technology Today (MTT), NICMAP Publication, CMTI, May 2006.
3. M.D. Deshpande et.al., “Resolving Causality Conflict in Modeling Wheel Dynamics using Bond Graph Technique “National Journal of Technology published by PSG college of Technology Coimbatore, May 28, 2006.
4. M.M.Nadakatti. et.al., “Knowledge Based Condition Monitoring Through Vibration   Parameters”: the Indian Journal of   Manufacturing Engineering, September 2007, Vol.2, Issue 3, pp. 166-173
5. M.M. Nadakatti. et.al., “AI Solutions for the Maintenance of General Purpose Industrial  Machinery”,   Plant Engineering Journal (PEJ), Indian Institution of Plant Engineers, Apr.– Jun. 2007, pp. V 1 – V 9.
6. M.S. Patil. et.al., “Wavelet de-noising using customized thresholding for bearing fault detection”. Journal of Manufacturing Engineering, 4(4), pp.257-263, 2009       ( ISSN 0973-6867)
7. M.S. Patil. et.al., “Study on wavelet-based thresholding for noise reduction to detect bearing defect” National Journal of TECHNOLOGY, 4(3), pp.1-6, 2008       (ISSN 0973-1334)
8. M.S. Majali et.al, “Daily Management Process For Reduce Cost Of Quality In Automobile Industry:. Journal of Mechanical Engineering & Technology, ssue1, July – Dec 2013, pp:45-53.
9. V.S. Majali et.al “Development of an analytical tool in Modelling of Non-air-conditioned Multi-zone Buildings” Journal of Institute Of Engineers, Volume 86, pp: 15-19, April 2005.
10. V.S. Majali. et.al.,, “Computer Aided Building Energy Simulation” Journal of the Institution of Engineers, Volume 86, pp:28 – 31, October 2005 Note: (This paper won the first prize & Gold medal & cash prize for the year 2005)

Partial list…..

International Journal (Partial List)

1. H.K Amarnath et.al., “A Study on the Thermal Performance and Emissions of a Variable Compression Ratio Diesel engine Fuelled with Karanja Biodiesel and the Optimization of Parameters Based on Experimental Data.” International Journal of Green Energy. (Taylor & Francis),9: 841-863 November 2012.
2. H.K Amarnath et.al., “A Comparative Experimental Study Between the Biodiesels of Karanja, Jatropha and Palm Oils Based on Their Performance and Emissions in a Four Stroke Diesel Engine.” ARPN Journal of Engineering and Applied Science Vol. 7,No.4. pp. 1-9 April 2012
3. H.K Amarnath et.al., “Simulations of Supercritical Aerofoil at Different Angle of Attack with a Simple Aerofoil Using Fluent” International Journal of Engineering Research & Technology (IJERT) Vol. 3 Issue 8, ISSN: 2278-0181 August – 2014.
4. H.K Amarnath et.al., “Finite Element Analysis of Tie-Rod for Spacecrafts” International Journal of Advanced Technology in Engineering and Science www.ijates.com Volume No.02, Issue No. 06, ISSN (online): 2348 – 7550, June 2014.
5. T.R. Anil. et.al., “Analysis and Optimal Design of a Producer Carburetor” International Journal of Applied Engineering Research ISSN 0973-4562 Volume 4 Number 7 (2009) pp. 1125–1138
6. A.A. Kulkarni et.al “Design and Analysis of Ferrule Crimping Machine” International Journal of Scientific & Engineering Research IIJSER) Vol.-7, ISSN:2229 -5518 IF 3.2, 8 July 2015
7. A.A. Kulkarni et.al “Design and Analysis of Ferrule Crimping Machine” Internationa Journal of Recent Technologies in Mechanical & Electical Engineering (IJRMEE) Vol. 2, issue – 7 pp 19-27 ISSN:2349 – 7947 IF. 2.084 7 July 2015
8. A.A. Kulkarni et.al “Finite Element Analysis of Hydraulic Press Machine” Internationa Journal of Recent Technologies in Mechanical & Electical Engineering (IJRMEE) Vol. 2, issue – 5 pp 19-27 ISSN:2349 – 7947 IF. 2.084 5 May 2015
9. A.A. Kulkarni et.al.,“An Integrated Methodology To Fixturing Technology” IJRET-International Journal of Research in Engineering and Technology ISSN:2319-1163 pISSN : 2321-7308 Vol.e. issue:03, page 764-767, 03May 2014.
10. A.V. Kulkarni et.al.,”Minimum Quantity Lubrication in Deep Hole Drilling” IJRET-International Journal of Research in Engineering and Technology ISSN:2319-1163 pISSN : 2321-7308 Vol. e. issue:03, page 712-717, 03May 2014.
11. A.V. Kulkarni et.al., “Parameter Optimization of No Bake Core Making Process by Using Taguchi Method” IJRET-International Journal of Research in Engineering and Technology. Vol.-3, Issue – 7 01.June.2014.SSN:2347-5013 page 426 -429
12. PArunkumar et.al., “DOE based investigation for C40 and C90 material to improve the surface attributes using EDM”, published in the International Journal of Scientific and Research Publications, July 2012.
13. P.Arunkumar et.al ., “A System for Extracting Product Features from CAD Models – A STEP approach”, International Journal of Contemporary Engineering Sciences, Vol 1, 2008, No. 3, PP 139 – 146.
14. P.Arunkumar et.al., “An Intelligent and integrated system for process planning and scheduling of components having rotational features and cavities with free-form cross section”, under review in the International Journal of Computer Integrated Manufacturing, Taylor & Francis.
15. G.D Gokak al.,“Performance Analysis of Uncontrolled Thermo – Siphon Loop Cylindrical Collector for Making Coffee” International Conference on Recent Trends in Engineering, Technology & management pp766-771-2011
16. M.M.Nadakatti. et.al., “Artificial Intelligence Based Condition Monitoring for Plant Maintenance”, International Journal of Assembly Automation, Elsevier Publication, Vol.28 No.2 2008 pp.143-150
17. M.M.Nadakatti. et.al., “A Knowledge Based Approach For The Maintenance Of General Purpose Industrial Machinery”, Proceedings of IET Journal of Manufacturing Engineer, April / May 2006.
18. M.M.Nadakatti. et.al., “Integrated Machine Health Monitoring: A Knowledge-based Approach,” International Journal of System Assurance Engineering and Management vol. 1-2, 2013
19. M.S. Patil et.al., “Stress Analysis and Fatigue Life Prediction for Splice Joint in an Aircraft Fugelage through an FEM Approach” International Journal of Engineering and Innovation Technology (IJEIT) Volume 1, Issue 4, April 2012 page142 – 144
20. M.S. Patil et.al.,“Experimental Studies Using Response Surface Methodology for Condition Monitoring of Ball Bearings” ASME, Journal of Tribology , Vol. 132, pp.044505-1, October 2010, 0.722
21. M.S. Patil et.al., “A theoretical model to predict the effect of localized defect on vibrations associated with ball bearings” Journal of Mechanical Sciences, 52, pp. 1193 – 1201, 2010 Impact factor:1.288
22. M.S. Patil et.al.,“Bearing Signature Analysis As A Medium For Fault Diagnosis: A Review” ASME, Journal of Tribology , Vol. 130(1), pp.014001-7, Jan 2008 Impact factor: 0.722
23. M.S. Patil et.al.,“Application of Statistical Moments and Spectral Analysis for Condition Monitoring of   Rolling Element Bearings” International Journal of COMADEM, UK Vol 12(1), pp. 31-36, 2009
24. M.S. Patil et.al.,”An Analytical model to predict the Effect of Localized defect on Vibrations Associated with Ball Bearing” International Journal of Engineering Systems Modeling and Simulation (IJESMS), Vol 1(4), pp. 242 – 252, 2009
25. M.S. Patil et.al., “ANOVA and KS-test of wavelet coefficients for condition monitoring of ball bearings” International Journal of Wavelet Theory and Applications, 3(1), pp. 169 – 185, 2009
26. S.K.Ambekar et.al., “Parametric Approach for Vibration Analysis Centrifuge” International Journal of Science and Research (IJSR) Vol. 3 Issue 7. July 2014 ISSN 2319-7064 Impact Factor (2012):3.358
27. S.L.Gombi et.al., “Design and Analysis of Drill Jig for Head and Cover Part of the Actuator. International Journal of Engineering Research & Technology ISSN: 2278-0181 Vol. 3 Issue 8, August – 2014 page 184-191
28. S.L.Gombi et.al.,”A Solution to the Invers Problem of Impact Force Determination from Structural Responses”. International Journal of Engineering and Innovative Technology. (IJEIT) Vol.1, Issue-3, March 2012
29. S.LGombi et.al., “Estimation of Impact Effect on the Cutting Tool of a Shaper from Measurement of Responses During Machining” International Journal of Manufacturing Science & Production. 2012 Page 161-169.
30. S.I. Bekinal et.al.,”Analysis of Magnetic field created by permanent magnet rings in permanent magnet bearing” International Journal of Applied Electromagnetic and Mechanics Vol. 46(1) (2014) page155-269 Oct. 2014 ISSN 1383-5416
31. S.I. Bekinal et.al.,”Analysis of the magnetic field created by permanent magnet rings in permanent magnet bearings “international Journal of Applied Electromagnetic and Mechanics 00 (2014)1-15
32. S.I. Bekinal et.al.,”Permanent Magnet Thrust Bearing: Theoretical and Experimental Results” Progress in Electromagnetic B, Vol. 56, 269-287, 5th Nov. 2013.
33. S.I. Bekinal et.al.,”Analysis of Radial Magnetized Permanent Magnet Bearing Characteristics for Five Degrees of Freedom” Progress in Electromagnetic B, Vol. 52, 307-326, 17 June 2013
34. S.I. Bekinal et.al.,”Analysis of Radial Magnetized Permanent Magnet Bearing Characteristics.” Progress in Electromagnetic B, Vol. 47, 87-105 19 Dec. 2013
35. S.I. Bekinal et.al., “Analysis of Axially Magnetized Permanent Magnet Bearing Characteristics” Progress in Electromagnetic B, Vol. 44, 327-343 October 2012
36. S.I. Bekinal et.al.,”Optimization of Halbatch Magnetized Permanent Magnet Axial Bearing” International Journal of Engineering and Innovative Technology. (IJEIT) Vol. 2, Issue-1, July 2012 page 195-199
37. S.H Kulkarni et.al., “Rural Electrification through Renewable Energy Sources – An Overview of Challenges and Prospects” IJRET-International Journal of Recherch in Engineering and Technology. Vol.-3, Issue – 6 01 .June.2014.SSN:2347-5013   page 384-389
38. S.R Kulkarni et.al.,”Biodegradable Compositor: Vinyl Ester Reinforced With Coconut Fibers and Vinyl Ester Reinforced With Coconut Fibers and Rubber Particles” International Journal of Innovative Research In Science, Engineering & Technology Vol. 3, Issue 8, August 2014 ISSN: 2319-8753
39. Tushar Haval “Analysis and characterization of Tesnise and Compressive Properties of the Chopped Strand Mat E-Glass Fiber Reinforced Epoxy Composites” Advanced Engineering and Applied Sciences. Vol. 4 issue 3, page 29-33 ISSN 2320-3927 14 July 2014
40. Tushar Haval “Effect of Natural and Synthetic Fibers on Mechanical Properties of Epoxy Resin” International Journal of Advanced Technology and Science. Vol. 2, issue 7, page 58-66 ISSN 2348-7550, 7 July 2014
41. V.N Satwik et.al., “Finite Element Study of the Effect of Rectangular Surface Projections on Cooling of Electronics Chip. ISSN0974-3588.Jan10-June10 Vol-3..Issue.1 page 555” International Journal of Emerging Technologies and Applications in Engineering, Technology and Sciences.
42. V.S Majali. et.al., “Effective Utilization of an Axially Grooved Wick Structure in the Heat Pipes and its Performance Analysis for the Heat Pipe Heat Exchanger Used in Waste Heat Recovery”, International Journal of Engineering Research & Technology, Volume. 3, Issue. 06 , June – 2014. ISSN: 2278 -0181.  (Impact factor: 1.76)
43. V.S Majali. et.al., “Solar Thermal Modeling of Non-air-conditioned Multizone   Buildings: Evaluation of Heat Fluxes and Temperatures” International Journal of Green Energy. Taylor and Francis Publications vol5: pp: 405–412, 2008. (Impact factor 1.1)
44. V.S Majali et.al., “Impact of Poor Quality Cost in Automobile Industry” International Journal of Quality Engineering 3 and Technology, 3 3 Vol 3, No.4, 2013, ISSN 1757-2185, Inter science Publishers, UK.
45. V.S Majali et.al., “Automotive Product Development Process (APDP) Using Knowledge Management for Lower the “Quality Cost” International Journal of multidisciplinary research, Vol 3 (4), April 2013, ISSN 2231-5780.
46. V.S Majali et.al., “Assessment of Cost of poor quality fusing knowledge based system” International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 Vol. 2 Issue 2, Feb -2013

47. V.S Majali et.al., “Assessment of Supplier Quality Cost in Automobile Industry”, International Journal 3 of Quality Engineering 3 and Technology, 3 3 Vol 3, No.4, 2013, ISSN 1757-2185, Inter science Publishers, UK.
48. V.S Majali et.al., “Supplier Performance Evaluation amd Monitoring Through PPMeq to Reduce Quality Cost” International Journal of Global Technology Initiatives,, issue-2, pp 1-7 December 2012
49. V.S Majali et.al., “Assessment of Cost of poor quality for Automobile Industry” International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622 Vol. 2, Issue 6, pp. 330-336 Dec. 2012
50. V.S Majali et.al., “Automotive Product Development Process (APDP) Strategy by Integrating Sis Sgma to Reduce the Cost of Quality. ” IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ISSN 2278-1684 Vol. 3 Nov-Dec. 2012. PP 40 -48
51. V.S Majali et.al., “Knowledge Based Supplier Quality Management System for Automobile Industry” International Journal of Engineering Innovation & Research Vol. 1, Issue: 2277 – 5668 page 327 – 331 July. 2012
52. V.S Majali et.al., “Developing a Knowledge Management Strategy to Reduce Cost of Quality for Automobile Industry” The International Research Journal of Science & IT Management RJSITM: Volume:02 (2012), issue no-7, July page 45-48
53. V.S Majali et.al.,“Vendor Relation ship Management strategy development Process for Automobile Industry to reduce cost of quality. ISSN: 2251-1563″ The International” Research Journal of Science & IT Management RJSITM: Volume:01, Number:08, June-2012, page29-33
54. V.S Majali et.al.,“Cost of Quality in Automotive Industry & Essence of Knowledge Management ISSN:2229-4562, Vol2, Issue 3, March 2012.(Impact factor: 1.29)” International Journal of Green Energy. Taylor and Francis Publications vol 5: pp: 405–412, 2008.
55. V.S Majali et.al.,“Solar Thermal Modeling of Non-air-conditioned Multizone Buildings: Evaluation of Heat Fluxes and Temperatures (Impact factor 1.1). “International Journal of Green Energy. Taylor and Francis Publications vol 5: pp: 405–412, 2008.
56. Vivek V Kulkarnial., “Knowledge based Systems, a Support to the Prevent Maintenance” International Journal of Innovations in Engineering Technology Vol. 4 issue 1. June 2014 page 104-111 ISSN: 2319-1058
57. M.D. Deshpande et.al., “Finite Element Analysis of springback of sheet metal in Wipe Bending process.” nternational Journal of Science & research (IJSR) Vol.3, issue 7, July 2014, (Online) ISSN: 2319-7064
58. S.M Bapat et.al.,“Exergetic evaluation and comparison of quintuple effect evaporation units in Indian Sugar Industries” is accepted for publication. ” 27 May 2012 International Journal of Energy Research”, John Wiley & Sons (Impact factor 1.86).
59. Akhil Deshpande,al.,” Estimation of cutting tool life by varying cross feed with the knowledge of actual cutting force acting on it” IJER International Journal of Research in Engineering and Technology. Vol. 2. Issue – 3, e-ISSN:2395-0056 p-ISSN: 2395-0072, June-2015.
60. Akhil Deshpande,al., ”Optimization of the Structural Design by Studying its Response of the Operating Loads acting on it” International Journal of Emerging Technology in Computer Science and Electronics Vol.14 12P113. ISSN:0976-13253, May 2015
61. Akhil Deshpande, al., “ Collaborative learning technique using internet sharing for demonstration of CAED”, IJCIM 2014, ISSN: 0858-7027
62. Akhil Deshpande al., “Collaborating e-learning in demonstration of mechanical practical’s for technical students”, IJCIM 2013, ISSN: 0858-7027
63. V.V. Kulkarni. et.al., “Developing a Mathematical Model to Predict Power Consumption In Turning of EN-24 and EN-18 under Dry and Wet Conditions” International Journal of Innovative Research in Science, Engineering and Technology. Vol.3. issue-9, September 2014.
64. V.V. Kulkarni. et.al., “Investigation on Influence of Speed, Free ad DOC on Surface, Roughness in Turning EN-24 and EN-18 under Dry and Wet Conditions” International Journal of Innovative Research in Science, Engineering and Technology. Vol.3. issue-8 August 2014.
65. Suraj Patil et.al., “ Resistance Spot Welding of CRCA Steel Sheets using Surface Modified Electrodes” International Journal of Innovative Research in Advanced Engineering (IJIRAE) ISSN:2349-2163, Vol.3. issue-6, July 2014pp113.121.
66. Suraj Patil et.al., “Analysis of Population Growth of India and Estimation for Future” IJISET, Vol.3, issue 9, September 2014,
67. P. Kakkamari et.al., “Analysis and Characterization of Tensile and Compressive Properties of the Chopped Strand MAT E-Glass Fibre Reinforced Epoxy Composites” ” Advanced Engineering and Applied Sciences: An International Journal Universal Research Publications. ISSN 2320–3927.4(3). 29-33.14 JULY 2014.
68. D.Kattiman, R.K. Tavildar, P.P. Kakkamari “Design and Analysis of Progressive Tool for Moving Contact Holder”, in Journal of Emerging Technologies and Innovative Research (JETIR), JETIR (ISSN-2349-5162), JETIR1507019, on July 2015, Volume 2, Issue 6.
69. H.B. Kulkarni et.al., “Status of Rural Electrification In India, Energy Scenario and People‘s Perception Towards Renewable Energy Technologies”, Strategic Planning for Energy and Environment-SPEE, Taylor and Francis, TnF Online, Summer 2015, Vol. 35 Issue-01.
70. H .B. Kulkarni et.al., International Journal   of   Innovative   Research   in   Advanced Engineering (IJIRAE),ISSN: 2349-2163,Volume 1 Issue 6, July 2014, pp.113-121 et.al., “Theoretical Investigation Performance of Proportional Directional Control Value Using MATLAB / Simulink, AE International Journal of Science and Technology”, AEIJST – AE International Journal of Science and Technology, ARCHERS & ELEVATORS Publishing house – June 2014 -Vol 2 Issue 6 ISSN – 2348- 6732
71. H.B. Kulkarni et.al., “Rural Electrification through Renewable Energy Sources – An Overview of Challenges and Prospects” International Journal of Engineering Research – IJER, Volume 3, Issue No-6, PP 384-389, ISSN:2319-6890)(online),2347-5013(print) 01 June 2014
72. Yogita N Potdar et.al., “Analysis of H-Type frame” IJSET-International Journal of scientific engineering and technology
73. Yogita N Potdar et.al., “Investagation of port leak in ic engine method using paired comparison method” ICETES 2015, JCE, Belagavi, India May 2015
74. Prajakta Patil et.al., “Resistance Spot welding of CRCA steel sheets using surface modified electrodes” International Journal   of   Innovative   Research   in   Advanced Engineering (IJIRAE),ISSN: 2349-2163,Volume 1 Issue 6, July 2014, pp.113-121
75. Vinayak V Kulkarni “Knowledge Based Systems, a support to the Preventive Maintanance” International Journal of Innovations in Engineering znd Technology. Vol-4 issue 1, pp104-114 ISSN 2319-1058 Impact Factor 1.25 June 2014
76. Vinayak V Kulkarni “RFID based system for prevention of material mix-up at various stages in Metal-Injection-Molding process” International Journal of Innovations in Engineering 2nd Technology. Vol-5 issue 3, pp271-277 ISSN 2319-1058 Impact Factor 1.25 3 June 2015
77. Rajeev Tavildar “Casting Defect Analysis And Optimization Using Computer Aided Casting Simulation Technique,” IJIRSET Volume III, Issue VII, July 2014.
78. Rajeev Tavildar “Kinematic Analysis Of Circuit Breaker” IJREST, Volume-2, Issue-6, Jun, 2015.
79. Anupama Kallol, Dr.Anand S.Deshpande, Dr.T.V.Herwadkar, P.Arunkumar , An Experimental investigation on effects of input parameters on the responses in Electric Discharge Machining process, published in Manufacturing Technology Today, CMTI, Volume 8, Issue 4, April 2009.
80. Anupama Kallol, Dr.Anand S.Deshpande,Dr.T.V.Herwadkar, An experimental study for determination of the effects of input machining parameters on surface finish in electrical discharge machining process, published in the International Journal of Emerging Technologies & Applications in Engineering Technology & Sciences, volume 3, Issue 2, pp. 259-264, July 2010 – December 2010.
81. Anupama Kallol, Dr.Anand S.Deshpande, Dr.T.V.Herwadkar Design of Experiments based investigations on the effect of input parameters on Material Removal Rate (MRR) and Tool Wear Rate (TWR) in Electric Discharge Machining (EDM) process, published in International Journal on Mechanical & Automobile Engineering, Volume 7, Issue 1, December 2009 – February 2010
82. Anupama Kallol, Dr.Anand S.Deshpande, Arunkumar P, DOE based investigation for C40 and C90 material to improve the surface attributes using EDM, published in the International Journal of Scientific and Research Publications, July 2012.
83. Jayant K Kittur, V. Herwadkar, Mahesh B Parappagoudar (2009) Linear Modeling of Aluminium Alloy Die Casting process Using Conventional Statistical Regression Analysis, IJMAE Vol.05, No.7 pp.64-74
84. Kittur, Jayant K., Parappagoudar, M. B. (2012) Forward and reverse mappings in die casting process by neural network-based approaches, Journal for Manufacturing Science and Production Volume 12, Issue 1 pp 65–80,
85. Jayant K Kittur, M N Choudhari, T V Herwadkar, Mahesh B. Parappagoudar, Modeling and Multi-response Optimization of Pressure Die casting Process using Response Surface Methodology, International Journal of Advanced Manufacturing Technology (Revised paper submitted)
86. Jayant K Kittur, Manjunath Patel G.C, T V Herwadkar, Mahesh B. Parappagoudar, Modeling of Pressure Die Casting Process – An Artificial Intelligence Approach, International Journal of Cast Metals Research ( Under Review)
87. Vishaldatt V Kohir, S T Dundur, Jayant Kittur   Study The Infulence Of Machining Parameters On The Inclination Of Flank Wear Land With Cutting Direction. Journal Of Information, Knowledge And Research In Mechanical Engineering ISSN 0975 – 668, Nov 12 To Oct 13 Volume – 02, Issue – 02 Page 552-557
88. Deshpande A.S. , Chate U.N. , Vinayak Malik “PRODUCT RE-DESIGNING AND DEVELOPMENT OF KEY DUPLICATING MACHINE – A CASE STUDY” International Journal on Design and Manufacturing Technologies, Vol.2, No.1, July 2008, pp 52-59
89. Vinayak Malik, Sanjeev N.K, H Suresh Hebbar, Satish V. Kailas “Time Efficient Simulations of Plunge and Dwell Phase of FSW and its Significance in FSSW” Journal of Procedia Engineering, Vol. 5, 2014, pp 630-639.
90. Sanjeev N K, Vinayak Malik, H. Suresh Hebbar “VERIFICATION OF JOHNSON-COOK MATERIAL MODEL CONSTANTS OF AA2024-T3 FOR USE IN FINITE ELEMENT SIMULATION OF FRICTION STIR WELDING AND ITS UTILIZATION IN SEVERE PLASTIC DEFORMATION PROCESS MODELLING” International Journal of Research in Engineering and Technology, Vol. 3, Issue 6, June 2014, pp 98-102.
91. Sanjeev N.K, Vinayak Malik, H. Suresh Hebbar “Effect of Coefficient of Friction in Finite Element Modeling of Friction Stir Welding and its Importance in Manufacturing Process Modeling Applications” International Journal of Applied Sciences and Engineering Research, Vol. 3, No. 4, 2014, pp 755-762
92. Ganesh R Chate, “AN INTEGRATED METHODOLOGY TO FIXTURING TECHNOLOGY”, IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308.
93. Ganesh R Chate, “PROCESS PARAMETER SETTING FOR CORE SHOOTER MACHINE BY TAGUCHI APPROACH”, in science direct, procedia material science5(2014)1976 -1985.
94. Nikhil R, Experimental study and Analysis of Mechanical behavior of Hygrothermally conditioned Glass/Epoxy Composites, International Journal of Composite Materials, Thomson Reuters. (COMMUNICATED)
95. Nikhil R, Analysis and characterization of Tensile and Compressive Properties of the Chopped Strand Mat E-Glass Fiber Reinforced Epoxy Composites,  Advanced Engineering and Applied Sciences: An International Journal, Volume 4, Issue 3, 2014.
96. Vivek Tiwary and Narayan Prabhu, “ Cooling performance of select mineral oil and polymer quenchants” ASTM Journal, 2014.
97. Vivek Tiwary, Adarsh patil, Zuber Mulla and Chandrashekar I. Bhavikatti, “Prediction of quench severity of various quench media based on hardness and microstructure studies” Volume 1, Issue 3 , May 2014, IJIRAE.
98. Mahesh Kori, M. G. Kulthe, R. K. Goyal “Influence of Cu Micro Particles on Mechanical Properties of Injection Molded Polypropylene/Cu Composites” in International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol. 3, Issue 6, June 2014, PP 14034-14043, ISSN: 2319-8753.
99. Vinay M. Murgod, Dr. Anupama N. Kallol, Dr. Shivakumar S., Prof. Roopa R. Navalli, Prof. Sharachandra Kusugal published a paper titled “Analysis of Ph Meter Cover” in International Journal of Recent Technology & Engineering (IJRTE), Volume 4, Issue 1, March 2015, ISSN 2277-3878
100. Jayant K. Kittur, Prof. M. N. Choudhari & Dr. M. B. Parappagoudar published a paper titled “Modelling and Multi-response Optimization of Pressure Die Casting Process Using Response Surface Methodology” at The International Journal of Advanced Manufacturing Technology ISSN 0268-3768 Volume:77 Combined 1-4, Int. Adv. Manuf. Techno.2015) 77:211-224, DOI 10.1007/s00170-0146451-x in March 2015
101. Vinayak R. Malik, Prof. Sanjeev N K, Prof. H. Suresh Hebbar, Dr. Satish V. Kailas published a paper titled “Investigations on the Effect of Various Tool Pin Profiles in Friction Stir Welding Using Finite Element Simulations” Journal of Procedia Engineering, Vol. 97, January 2015, pp 1060-1068.
102. Vinayak R. Malik, Prof. Sanjeev N K, Prof. H. Suresh Hebbar, Dr. Satish V. Kailas published a paper titled “Finite Element Simulation of Exit Hole Filling for Friction Stir Spot Welding – A Modified Technique to Apply Practically” Journal of Procedia Engineering, Vol. 97, January 2015, pp 1265-1273.
103. Nikhil R, Ganesh Chate, Sharaschandra Kusugal, Mahesh A Kori published a paper on “Robust Design Approach to Analyze Casting Defects in Foundry Industry” in  Advanced Engineering and Applied Sciences: An International Journal 2015; 5(3): 53-58
104. Ganesh Chate, Dr. Anupama Kallol published a paper on “Energy Auditing of Foundries” in Advanced Engineering and Applied Sciences: An International Journal, 2015; 5(3): 74-78
105. Nikhil R, Mahesh A Kori, Dr. Shivakumar S, published a paper on “Mechanical & tribological characterization of  415 and 600 gsm fiber reinforced composites” in Advanced Engineering and Applied Sciences: An International Journal, 2015; 5(3): 34-41
106. Geetanjali S. Guggari, Veena Badiger,  & Dr. Shivakumar S. Published Paper Titled  “ Microstructure & Wear Behaviour of as Cast AL-25 mg2Si-2Cu-2ni Alloy ”  in IJER; International Journal  Issue 9, Vol. 4, Page 470-474
107. Sharachandra S. Kusugal Published a paper titled as “ Analysis of Resistance Spot Welding Parameters & Reduction of Spatters Using DOE approach”  Published in Volume 4, Issue 8, August 2015 in IJCMS-15
108. Sharachandra S. Kusugal, Veena Badiger, Geetanjali S. Guggari & Dr. Shivakumar S. Presented & Published a Paper Titled as “ Design & Development of Blackboard Wiping Revive”  in IJSC : ISSN : 2347-2200
109. Dr. J. K. Kittur Published a paper Titled “Study and Analysis of Effect of Cutting Parameters on Cutting Forces & Surface Roughness” in Advance Engg. & Applied Sciences (AEAS-2015) International Journal 2015; 5(3), ISSN 2320-3927, Page No. 63 to 73 Dt. 07^th July 2015.

Conference papers

National Conference (Partial List)

1. S.L Gombi. et.al.,” Role of Regularization Techniques in the Inverse Impact Force Identification Problems” National conference held at JNNC, Shimoga during   11-12 November 2010.
2. S.L Gombi. et.al., “Inverse Identification of Harmonic Force on Cantilever Beam Using Inverse Finite Element Method “NITK, Suratkal during 20th to 22nd   May 2010
3. S.L Gombi. et.al., “ Inverse identification of overweight of a truck using bridge response” paper presented at BMS College of Engg., Bangalore, 28 – 29 Agu.2008
4. A.V. Kulkarni. et.al., “An Integrated Methodology To Fixturing Technology” National Conference on Recent Innovations In Engineering and Technology -2014, organised by ECE, CSE and Mechanical Departments. BKIT, Bhalki held on 3rd & 4th May 2014.
5. A.V. Kulkarni. et.al., “Minimum Quantity Lubrication in Deep Hole Drilling” National Conference on Recent Innovations In Engineering and Technology -2014, organised by ECE, CSE and Mechanical Departments. BKIT, Bhalki held on 3rd & 4th May 2014
6. M.M Nadakatti  et.al., “Conceptual Overview of Total Productive Maintenance,” presented at the National Conference on Modern Trends in Management, MTM-2004, GIT, Belguam, India, 2004.
7. M.M Nadakatti et.al., “Knowledge Based Maintenance Management,” presented at the National Conference on Advances in Mechanical Engg. NACAMES-2004, SSIT, Tumkur, India, 2004.
8. M.M. Nadakatti et.al., “Online / Offline Condition Monitoring Techniques for Tribological Systems,” presented at the National Conference on Advances in Mechanical Engg., NAME 2004, JNNCE, Shimoga, India, 2004.
9. M.M. Nadakatti 4] Nadakatti, Ramachandra, and S. Kumar, “Predictive Maintenance: An Overview,” presented at the National Conference on Modern Trends in Management, MTM-2004, G.I.T., Belgaum, India, 2004.
10. M.M. Nadakatti, “Tribological Failures, Monitoring Techniques and Current Research Areas,” presented at the National Conference on Mechanical Engg., MSRIT, Bangalore, India, 2004.
11. M.M. Nadakatti “Comparison of Bearings Using Vibration Analysis,” presented at the National Conference on Recent Trends in Design & Manufacturing Technology, RTDMT-2005, Kumaraguru College Technology, Coimbatore, India, 2005.
12. M.M. Nadakatti Knowledge Based Maintenance Management For Mechanical Systems,” presented at the National Conference on Mechanical Engg. NATCON-2005, GCE, Ramanagaram, Bangalore, India, 2005.
13. M.M. Nadakatti “Machinery Fault Diagnosis Using AI Technique,” presented at the National Conference on Recent Trends in Mechanical Engineering (RTME ), SJCE, Mysore, India, 2006.
14. V.S.Majali et.al., “Computer codes for the estimation of thermal performance of buildings”, Orientation course on Solar Passive Architecture, Feb 01-03, 1996, IIT Bombay.
15. V.S.Majali et.al., “Energy Estimating Methods – A Comparative Study”All India Seminar on Energy and Environment In 21st Century’, 28 – 29 December, 2002, Bhubaneswar, India
16. V.S.Majali et.al., “Computer Aided Building Simulation Using Finite Difference Method”, ‘19th National Convention of Architectural Engineers’, November 1-2, 2004, MANIT, Bhopal, India.
17. V.S.Majali et.al., “Numerical Analysis of Solar Passive Heating of Non Air-Conditioned Single Zone Building Using A Thermal Storage Wall With Phase Changing Component Material”, ‘ 2nd National Conference on Mechanical Engineering NATCON.ME 2005’, 11-12 March, 2005, Ghousia College of Engineering, Ramanagaram, Karnataka, India.
18. V.S.Majali et.al., “Role of Cost of Quality in the Automotive Industry, National Conference on Recent Trends in Mechanical Enginering, 2010, Indian Society for Heating Refrigeration and Air conditioning Engineers, Mumbai chapter, Held at Datta Meghe college of Engg, Navi Mumbai, 28-29 Aug 2010.
19. V.S.Majali et.al., “B-23 Review of Cost of Quality – A Cost of Automobile Industry” National Conference on Research & Development in Mechanical Engineering (NCRDME-2013) organised by R.G.I’S G.H.Raisoni College of Engineering & Management , Wagholi, Pune. During 11 & 12.03.2013.
20. S.Patil. et.al., Presented paper titled” Synthesis of copper doped zinc oxide Nano structures from spent Zn-MnO2 batteries from tribological applications”. Vaidyaniki (Design and Manufacturing), a national level project paper presentation competition, organised by Radiancd 2013 at IIT Bombay. On 10.03.2013
21. S.Patil. et.al., “KS-static of wavelet coefficients for fault detection in rolling contact bearing” 26th Indian Engineering Congress 2011, The Institution of Engineers (India), Bangalore Palace,Bangalore, 15th-18th Dec 2011.
22. S.Patil  et.al., “Presented paper titled Synthesis of copper doped zinc oxide Nano structures from spent Zn-MnO2 battaries from tribological applications.” National Conference held at S.K.S.V.M. Agadi Collage of Engineering & Techology, Laxmeshwar on 26.03.2011
23. S.Patil. et.al., “Experimental Investigation of the Role of Kurtosis and Spectral Analysis for Condition Monitoring of Rolling Element Bearings” 2nd national Conference on Recent Developments in Mechanical Engineering at College of Engineering, Pandharpur, 23-24 Dec 2007
24. S.Patil. et.al., “Structural Materials for Machine Tools” National seminar on Recent Advances in Mechanical Engineering, K.K. Wagh College of Engg, Nashik, Jan 16,17 2004.
25. S.I.Bekinal et.al., “Force, moment and stiffness characteristics of permanent magnet bearings,” Proceedings of National Symposium on Rotor Dynamics, Indian Institute of Technology, Madras, India, pp. 161-168, Dec. 2011.
26. S.I.Bekinal et.al., “Complete analysis of Halbach magnetized permanent magnet bearing characteristics for five degrees of freedom,” Proceedings of National Symposium on Rotor Dynamics, Ambedkar Institute ofTechnology, Bangalore, India, Feb. 2014.
27. P.Arunkumar. “The Right STEP to Intelligent Manufacturing Information”, published in the proceedings of the National Conference on “Advances in Manufacturing Technology & Management” held at JNTU, Hyderabad on 29-30 August 2010.
28. P.Arunkumar et.al., “Process Parameter setting of RP machine for ABS plastic using taguchi approach”, published in the proceedings of 1st National Conference on Emerging trends in Chemistry and Materials science, KLS GIT, Belgaum, 13 Oct 2014.
29. M.D. Deshpande et.al., Presented paper titled “Different Approaches to Thermal Modeling of Buildings” at national Conference on “ New Renewable Energy prospects and Chanllenges at BITS, Mesra, Ranchi in 2007
30. M.D. Deshpande et.al., Presented a paper titled “Solar thermal modeling of single zone building using bond graph”, National Conference on Mechanical Engineering trends, held at BITM Ballary, 19-20 Feb 2010.
31. M.D. Deshpande et.al., Presented a paper titled “Simulation of Hydraulic System Using Bond-Graph, With FEA Aid” Recent Trends in Design and Manufacturing Technologies, 17th & 18th March 2005
32. M.D. Deshpande et.al., Presented a paper titled “Simulation of Pressure Reducing Valve using Bond Graph Technique” National Conference on “Emerging Trends in Mechanical Engineering”(ETIME 2006) at BMS College of Engineering on 10th February, 2006
33. P Kakkamari, K.D Kattimani et.al., “Published a paper titled “Zero Energy Green Building by Solar Trigeneration” All India Conference on Waste Management and Pollution control, organized by The Institution of Engineers (India) at Department of Civil Engineering, KLECET Belgaum during 7 – 8 March 2014.
34. H Kulkarni et.al., “Biomass to electricity- the Green Technology “National Conference on “Emerging Trends in Mechanical Engg. ETME-2012. Held at RRCE, Bangalore. February 24th and 25th 2012.

35. Vivek V Kulkarni  et.al., Presented a paper titled “ANTS – An Artificial Intelligence & Nano Technology Approach for Space Exploration” on Scientific & Engineering Computations, organized by the Department of Electronics & Telecommunication, College of Engineering, Osmanabad, Maharashtra, on 22nd & 23rd February, 2008.
36. Vivek V Kulkarni et.al., Published a paper titled “On Hand Technologies for Bio fuel Conversion – A Comprehensive Study” on Evolving Trends in Mechanical Engineering, organized by the Department of Mechanical Engineering, The Oxford College of Engineering, Bangalore, on 13th & 14th March, 2009.
37. Vivek V Kulkarni al., Published a paper titled “Artificial Intelligence & Nano Technology – The Future Expert Systems for Space Exploration” on Evolving Trends in Mechanical Engineering, organized by the Department of Mechanical Engineering, The Oxford College of Engineering, Bangalore, on 13th & 14th March, 2009.
38. Vivek V Kulkarni al., Published a paper titled “Electrification of Powertrain Systems Using Hybrid Technologies – A New Renewable Energy Concept” on Advances in Mechanical Sciences, organized by the Department of Mechanical Engineering, Kumarguru College of Technology, Coimbatore, Tamilnadu, on 26th & 27th March, 2009.
39. Vivek V Kulkarni et.al., Published a paper titled “Determination of a Dominant Characteristic on the Energy Efficiency of Bio fuel Usage” on Optimization Techniques in Engineering Sciences and Technologies, organized by the Department of Mechanical Engineering, Bannari Amman Institute of Technology, Coimbatore, Tamilnadu, on 27th & 28th March, 2009.
40. Vivek V Kulkarni et.al., Published a paper titled “Biodiesel Cetane Number Testing – A New Engine Method” on Evolving Trends in Mechanical Engineering, organized by the Department of Mechanical Engineering, Don Bosco Institute of Technology, Bangalore, on 30th & 31st March, 2009.
41. Vivek V Kulkarni at. el., Presented a Paper titled “ Effect of Magnetic Field on the properties of Diesel-an elementary study”, ETCM Emerging Trends in Chemistry and Material Science 1st1st National Conference on Emerging Trends in Chemistry and Materials Science (ETCM-2014), Organized by Department of Chemistry, KLS Gogte Institute of Technology, Belgaum on 13th October 2014.
42. Ganesh R Chate, “Process Parameter setting of RP machine for ABS plastic using taguchi approach”,1^ST NATIONAL CONFERENCE ON EMERGING TRENDS IN CHEMISTRY AND MATERIALS SCIENCE,held at KLS Gogte Institute of Technology,Belgaum 590008,on 13^th October 2014.
43. Ganesh R Chate, “AN INTRODUCTION TO LEAN SIX SIGMA” in national conferences on Recent Advances in Science ,Engineering,and management [NCRASEM] HELD ON 22^nd and 23^rd March 2013,at Dhananjay Mahadik group of Institutions ,Kagal,Kolhapur,Maharashtra,India.
44. Nikhil R, “Manufacturing Excellence through lean, green and safe practice”, National Conference MLEGS, KIT, Kolhapur, February 2013.
45. Vivek Tiwary , Mahesh Kori and Srinivas Kallol, “Determination of quench severities of different quench media by Cooling Curve Analysis method”, 1^st national conference, ETCM 2014.
46. Mahesh Kori, M. G. Kulthe, R. K. Goyal “Influence of Cu micro particles on Mechanical Properties of Injection Molded Polypropylene/Cu Composites” in National Conference on Materials for Electronic Applications (NCMEA-14), 30 Jan. – 1 Feb. 2014, Pune.

International Conference (Partial List)

1. S.L Gombi. et.al., ” Redesign of Component sizes of a Machine Tool using Inverse Identification of Operating Cutting Force” One – day International Conference on Innovations and Emerging Trends In Mechanical Engineering, held at Nagarjun College of Engineering and Technology, Bangalore. On 13.06.2014.
2. S.L Gombi. et.al., “Optimization of Components of Shaper Machine using Inverse I identification of Operating Cutting Force. Under Subtheme Design Optimization In the International Conference on Advances in Mechanical Engineering. Organized by Department of Mechanical Engineering, Collage of Engineering, Pune. During 29 – 31May 2013
3. S.L Gombi. et.al., “Identification of Impact Force Acting On a Cantilever Beam Using Inverse Technique” International Conference on Smart Materials and Nanotechnology in Engineering (SMN2011) to be held during5th -8th December 2011, Shenzhen, P. R. China.
4. S.L. Gombi. et.al., “Reconstruction of Impact Force Using the Frequency Response Function of the Structure” ICOPEN 2011 held from 23 – 25 March 2011 at Singapore Expo, Conference Halls G H. Singapore.
5. S.L. Gombi. et.al., “Inverse Identification of Impact Force Acting on Arbitrary Structures” Malaysian Nuclear agency , Kuala Lumpur during 29th Nov 2010 to 1st December 2010
6. S.L. Gombi. et.al., “Identification of Harmonic force Acting on Simply Supported Beam Using Inverse Finite Element Method” International Conference SIT, Tumkur during 18-19th November 2010.
7. S.L. Gombi et.al., “ Inverse methods for force identification in complex machines and structures” at SUSCET. Chandigarh, Punjab, 22-25th Jan 2008
8. T.R Anil et.al., “Analysis and Optimal Design of a Producer Gas Carburetor” International Conference on IC-ICAME 2008, 2 -4 July 2008 at Indian Institute of Science Bangalore.
9. T.R Anil et.al., “CFD Analysis of a Producer Gas Carburetor”   International Conference on Computer Aided Engineering 2007, 13 -15 December 2007 at Indian Institute of Technology Madras, Chennai.
10. T.R Anil et.al., “CFD Analysis of a Mixture Flow in a Producer Gas Carburetor” in an International Conference On Computational Fluid Dynamics, Acoustics, Heat Transfer and Electromagnetic” CFEMATCON-06, July 24-25, 2006, Andhra University, Visakhapatnam, INDIA.
11. A.V.Kulkarni “Application of Smed Methodology – A Case Study in a Medium Scale Cast Iron Foundry” International Conference o Advances in Production and Industrial Engineering (INCAPIE – 2015) Organised by Dept. of Produ. Engg. National Institute of Technology. Tiruchirapalli. During 20 – 21 Feb. 2015

12. M.M. Nadakatti, et.al.,  “Knowledge-Based Fault Diagnosis of Industrial Machinery Using Vibration Characteristics,” in Regional Conference on Recent Trends in Maintenance Management, Caledonian College of Engineering, Muscat, Oman, 2005, pp. 137-144.
13. M.M. Nadakatti “Knowledge-based Maintenance Management,” in International Conference on Emerging Technologies in Intelligent System and Control – EISCO-2005, Kumaraguru College of Technology, Coimbatore, India, 2005, pp. 534-540.
14. M.M. Nadakatti “A Knowledge-Based Approach For the Maintenance of General Purpose Industrial Machinery,” presented at the International Conference on Manufacturing Science and Technology 2006 (ICOMAST 06), Multimedia University, Melaka, Malaysia, 2006.
15. M.M. Nadakatti , “Knowledge-Based Condition Monitoring Through Vibration Charecteristics,” in 22nd International Conference on CAD / CAM / ROBOTCIS and Factories of Future 2006 (CARS & FOF 2006), V.I.T., Vellore, India, 2006, p. 1063.

16. M.M. Nadakatti “Knowledge-based Condition Monitoring Through Vibration Parameters,” in International Conference on Total Engineering, Analysis and Manufacturing Technologies, IISc., Bangalore, India, 2006, p. 25 and Proceedings CD.
17. M.M. Nadakatti , “Machine Health Monitoring : AN Integrated Approach,” in 2nd International Workshop and Congress on e-Maintenance, Lulea Technological University (LTU), Lulea, Sweden, 2012, p. Proceedings CD.
18. M.M. Nadakatti , “Knowledge-Based Systems for Machine Health Monitoring,” in International Conference of COMADEM 2013, Helsinki, Finland, 2013, p. Proceedings CD.
19. M.M Nadakatti “Knowledge-Based Condition Monitoring Using MATLAB,” in 2nd International Conference on Railway Engineering -2014 (ICRE-2014), Beijing Jiongtong University, Beijing, China, 2014.
20. V.S. Majali et.al., “Thermal Performance of Non Air Conditioned Single Zone and Multi-Zone Buildings”, ‘7th Asia Pacific Conference on the Built Environment’, Hong Kong SAR, 18-19 November 2003.
21. S. Majali et.al., “Solar Thermal Modeling of Non Air Conditioned Multi-zone Buildings”, ‘Building Sustainability, Value and Profit’, The CIBSE/ASHRAE International Conference, 24 – 26 September, 2003, Edinberg, Scotland.
22. V.S. Majal et.al., i “Thermal Performance of Non Air Conditioned Single zone Buildings”, ‘Building Sustainability, Value and Profit’, The CIBSE/ASHRAE International Conference, 24 – 26 September, 2003, Edinberg, Scotland.
23. V.S. Majali et.al., “Modeling Of Non Air Conditioned Single-zone Buildings, 2^nd Dubrovnik conference on Sustainable Development of Energy, Water and Environment Systems, June 15 – 20, 2003, Dubrovnik, Croatia.
24. V.S. Majali et.al., Modeling Of Non Air Conditioned Multi-zone Buildings, 2^nd Dubrovnik conference on Sustainable Development of Energy, Water and Environment Systems, June 15 – 20, 2003, Dubrovnik, Croatia.
25. V.S. Majali et.al., “Development of Analytic Tool, International Workshop on Solar Passive Architecture & Planning, Kolkatta, Sept 9-10, 1995.
26. V.S.Majali et.al., “ Study of waste heat recovery through heat pipe model and its scope for performance application at heat generation areas — Review, Proceedings on International Conference on Advanced Manufacturing and Automation INCAMA 2013, Organized by Department of Mechanical Engineering (DST-FIST Sponsored Department) KALASALINGAM UNIVERSITY (Kalasalingam Academy of Research and Education) Anand Nagar, krishnankoil – 626 126 Virudhunagar District, Tamilnadu, India March 28-30, 2013
27. S.Patil. et.al., “Experimental Investigations on the Influence of Defect Size on   Ball Bearing Vibration using Wavelet Transform” International   Conference on Aerospace Science and Technology (INCAST) organized by NAL, Bangalore during 26-28 June 200 8
28. S.Patil et.al.,.”Design of Off-line Condition Monitoring and fault Detection system for Rolling contact Bearings” International Conference on Emerging Technologies and Applications in Engineering, Technology and Sciences at Saurashtra University, Rajk ot, 13- 14 Jan 2008
29. S.I. Bekinal, et.al., “Hybrid Permanent Magnet and Foil Bearing System for Complete Passive Levitation of Rotor,” Proceedings of 10th International conference on Vibration Engineering and Technology of Machinery, University of Manchester, UK, pp. 939-949, September 9-11 2014.

30. P.Arunkumar et.al., “Design optimization of Hydraulic Press Frame”, presented & published at CAR’s & FOF 2006, An International Conference being organized at Vellore Institute of Technology, Vellore from July 19 to 22, 2006.
31. P.Arunkumar et.al., “Re-designing and development of Key duplicating machine using product development approach” published & presented at the International Conference on “Advances in Manufacturing Engineering” held at MIT, Manipal on 24-26 October, 2007.
32. P.Arunkumar et.al., “An Intelligent Feature Identification/ Extraction System for Manufacturing Industry using STEP”, published in the proceedings of The International Conference on “Emerging Trends in Engineering”, held at NMAM Institute of Technology, Nitte on May 4th & 5th 2011.
33. P.Arunkumar et.al., “A Feature Based Time-Cost Calculation and Process Planning System for Interacting Features”, published in the proceedings of The 5th International Conference on Advances in Mechanical Engineering (ICAME-2011), held at S.V. National Institute of Technology, Surat on June 06-08, 2011.
34. P.Arunkumar et.al., “An Intelligent and Integrated Manufacturing system for components having interacting rotational features”, published in the proceedings of The International Conference on Advances in Engineering and Technology (ICAET 2014), Bangalore, 23 March 2014.
35. P.Arunkumar et.al., “Investigations into the effect of FDM process parameters on the responses of Dimensional accuracy and Surface roughness for making ABS patterns to be used in investment casting “, published in the proceedings of International Conference on Polymer Composites, NITK Surathkal, December 19th-20th 2014.
36. P.Arunkumar et.al., “Study of geometrical dimension and process parameter setting of rapid prototyping machine by robust design”, published in the proceedings of International Conference on Polymer Composites, , NITK Surathkal, December 19th-20th 2014.
37. M.D. Deshpande  “Thermal Modeling of Non Air-Conditioned room Using Bond-Graph”, International Conference on Challenges and Opportunities in Mechanical Engineering Industrial Engineering and Management Studies “ICCOMIM-2012”, 11th to 13th July 2012. Vol No. 2, Page No. 652-657. Held at M S RAMAIAH Institute of Technology, Bangalore.
38. V.N.Satwik et.al., “Finite Elelement study of the effect of orientation on cooling of electronic chip” International conference and exhibition (TEAM TECH-2008) held at IISc,Bangalore. Sept 2008. Note: (Won Best Technical Paper Presentation Award)
39. V.N.Satwik et.al., “FiniteElement study of the effect of Thermzl Interface Material on cooling of electronic chip” International Conference (RAMPT-09) held at NEC, Kavilpatti Feb. 2009
40. G.D Gokak et.al., “Published a paper titled “Performance Analysis of Uncontrolled Thermo – Siphon Loop Cylindrical Collector for Making Coffee” International Conference on Recent Trends in Engineering, Technology & management pp766-771-2011
41. V.V. Kulkarni et.al., Published a paper titled “Technical Intervention in Puffed Rice Sector” on Advances in Mechanical & Building Sciences in the 3rd Millennium (ICAMB-2009), organized by School of Mechanical & Building Sciences & Center for Disaster Mitigation & Management VIT University, Vellore, Tamilnadu India, in association with State University of New York, Farmingdale, USA, during 14-16 December, 2009.
42. V.V. Kulkarni et.al., Published a paper titled “A Review on Potential Availability and Sustainability of World’s Biomass Resources – An Option to Reduce Green House Gases” in the 2nd International Conference on Advances in Mechanical & Building Sciences (ICAMB-2012), organized by School of Mechanical & Building Sciences & Center for Disaster Mitigation & Management VIT University, Vellore, Tamil Nadu India, in association with State University of New York, Farmingdale, USA, during 9-11, January 2012.
43. A. Deshpande “Optimization of the Structural Design by Studying its Response to the Operating Loads Acting on it.” ICETES 2015, JCE, Belagavi, India May 2015
44. A. Deshpande “Collaborative Learning Technique Using Internet Sharing for Demonstration of CAED.” Eleventh International Conference on E-Learning for Knowledge Based Society (December 2014), Bangkok Thailand. (Key Note Address)
45. A. Deshpande “Redesign of Component Sizes of a Machine Tool Using Inverse Identification of Operating Cutting Force.” IIETME 2014, NCET, Bengaluru, India June 2014
46. A.Deshpande “Collaborating E-Learning in Demonstration of Mechanical Practicals for Technical Students.” Tenth International Conference on E-Learning for Knowledge Based Society (December 2013), Bangkok Thailand (Key Note Address)
47. S.J Patil “Application of Smed Methodology – A Case Study in a Medium Scale Cast Iron Foundry” Presented in International Conference o Advances in Production and Industrial Engineering (INCAPIE – 2015) Organised by Dept. of Produ. Engg. National Institute of Technology. Tiruchirapalli. During 20 – 21 Feb. 2015
48. A.V. Kulkarni et.al., “Optimization of Process Parameters Using Taguchi Techniques (In a Cement Manufacturing industry)” VIII Annual International Conference of the Society of Operations Management National Institute of Industrial Engineering (NITIE), Mumbai, and University of Alabama in Huntsville, USA, National Institute of Industrial Engineering (NITIE), Mumbai, 17-12-2004 to 20-12-2004
49. Yogita N Potdar “Investagation of port leak in ic engine method using paired comparison method” ICETES 2015, JCE, Belagavi, India May 2015
50. Yogita N Potdar “Free Vibration Analysis of rectangular plates” IAETSD conference at Banglore 7th June 2015
51. Prajakta Patil “Optimization of Process Parameters Using Taguchi Techniques (In a Cement Manufacturing industry)” IAETSD conference at Banglore 7th June 2015
52. P Kakkamari et.al., “CFD Analysis of Trailing Edge Cooling Circuit of a Typical Gas Turbine Blade” , International conference on Advanced Materials, Manufacturing, Management & Thermal Sciences (AMMMT 2013), At S.I.T. Belagavi, ISBN-13 978-81-926304-0-3, May 03-04 2013
53. Anupama Kallol,Dr.Anand S.Deshpande,Machinability Analysis in Electro discharge Machining Process” at International Conference on Advanced Materials, published at the International Conference on Manufacturing, Management and Thermal Sciences [AMMMT] at SIT, Tumkur, 17 – 19 Nov 2010.
54. Anupama Kallol,Dr.Anand S.Deshpande Investigations & Comparison of the Effect of Performance Characteristics on Tool Wear Ratio in Electrical Discharge Machining (EDM) Process, published at ETRIM 2011, NIT Calicut, 11^th & 12^th June 2011.
55. Anupama Kallol, Dr.Anand S.Deshpande, Dr.T.V.Herwadkar A Study of Performance in Electrical Discharge Machining (EDM) Process, published in International Conference on Operational Excellence for Global Competitiveness-2011 (ICOEGC-2011) organized at R.V. College of Engineering, Bangalore, from 3^rd to 5^th February 2011.
56. Anupama Kallol,Dr.Anand S.Deshpande, Investigations and comparison of the effect of performance characteristics on Tool Wear Ratio (TWR) in Electric Discharge Machining (EDM) process, published in the 5^thInternational Conference on Advances.
57. Jayant K. Kittur, T.V. Herwadkar, M. B. Parappagoudar (2010) Modeling and Analysis of The Pressure Die Casting Using Response Surface Methodology, International conference on modeling, optimization, and computing, NIT Durgapur, October 28-30, 2010, AIP Conference Proceedings, Volume 1298 735-741.
58. K.Kittur, Manjunath Patel G C, M N Choudhary, T V Herwadkar, M B Parappagoudar (2011) Neural Network Model to Predict Drilling parameters on Surface Roughness, 5th International Conference on Advances in Mechanical Engineering, S V NIT Surat, (June 2011)  pp.1238-1242
59. Jayant K Kittur, Manjunath Patel G C , M N Choudhary, T V Herwadkar, M B Parappagoudar (2011) Neural Network model to Predict the Process parameters and Responses Using Forward and Reverse mapping, International Conference on Advances in Materials and Materials Processing, IIT Kharagpur,(December 9-11, 2011) pp33-34
60. Jayant K Kittur, M N Choudhary, T V Herwadkar, M B Parappagoudar (2010) Modeling of Die casting using Response Surface Methodology, International Conference AMMMT 2010, SIT, Tumkur (18-19 November 2010)
61. Vinayak Malik and Arunkumar P., “Re-designing and development of Key duplicating machine using product development approach” paper presented at International conference on “Advances in Manufacturing Engineering” held at MIT, Manipal on 24-26 October, 2007.
62. Vinayak Malik, Midhun K M and Satish V. Kailas, “A study of shear friction factor and the development of finite element model for friction stir processing” paper presented at 8^th International Conference on Industrial Tribology, held at The Westin Koregaon Park, Pune on 7-9 December, 2012
63. Malik Vinayak, K.M. Midhun, Satish V. Kailas “A Study of Shear Friction Factor in FSP/FSW for Developing a Finite Element Model and Its Importance in the Context of Formation of Defect Free and Defective Weld” paper presented at 5th World Tribology Congress, held at Torino, Italy, on 8-13th September, 2013.
64. Vinayak Malik, Sanjeev K, H. Suresh Hebbar, Satish V. Kailas “Optimization of Friction Stir Welding Process parameters Using Finite Element Approach” paper presented at International Conference on Friction Based Processes, held at Indian Institute of Science, Bangalore, on 3^rd to 5^th September, 2014.
65. Ganesh R Chate, “PROCESS PARAMETER SETTING FOR CORE SHOOTER MACHINE BY TAGUCHI APPROACH”, in International Conference on Advances in Manufacturing and Materials Engineering,AMME 2014,held from 27/03/2014 to 29/03/2014 at NITK,Surathkal,Karnataka,India.and this paper is published in science direct, procedia material science5(2014)1976 -1985.
66. Ganesh R Chate, “STUDY OF GEOMETRICAL DIMENSION AND PROCESS PARAMETER SETTING OF RAPID PROTOTYPING MACHINE BY ROBUST DESIGN”, got selected in International conference on polymer composites to be held on 19^th and 20^th secember 2014.
67. Ganesh R Chate, “REJECTION ANALYSIS AND REDUCTION OF REJECTION IN CAST IRON FOUNDRY BY Design of Experiments” in International Conference On Advances in Materials and Materials Processing (ICAMMP- 2011) in December 2011 at Indian Institute of Technology  Kharagpur (Poster Presentation)
68. Ganesh R Chate, “ADVNCES IN DRILLING OF COMPOSITE LAMINATES-A REVIEW”,in International Conference of Advanced Materials,manufacturing,management and Thermal Sciences -2013 ,May 03-04.(Paper Selected but not Presented) held at Siddaganga Institute of Tecnology,Tumkur,Karnataka-572103,India
69. Ganesh R Chate, “FEM analysis of an Injection molding process ”,in International Conference of Advanced Materials,manufacturing,management and Thermal Sciences -2013 ,May 03-04 , held at  Siddaganga Institute of Tecnology,Tumkur,Karnataka-572103,India.
70. Nikhil R, “Advances in drilling of Composite Laminates – A review”, AMMMT 2014, SIT, Tumkur, 3^rd May, 2014.
71. Nikhil R, “Study of degradation of GFRP under chemical exposure – review”, ICRTET, Puddukottai, Chennai, 13^thMarch, 2014.
72. Anand S. Deshpande, Dr. Arunkumar P and Mr. Vivek Tiwary, “Investigations into the effect of FDM process parameters on the be used responses of Dimensional accuracy and Surface roughness for making ABS patterns to in investment casting”, International conference on polymer composites, ICPC 2014.
73. Mahesh Kori, M. G. Kulthe, R. K. Goyal “study on injection moulded polypropylene / copper composites” in Powder Metallurgy International conference and exhibition PM-13, 7-9 Feb. 2013, Hyatt Regency, Pune, India.
74. Anupama N Kallol, Dr. Shivakumar S. presented & published a paper titled “The study and comparison of mechanical and corrosion properties of magnesium based alloys for medical implants”, in AMPD 2015 at SVNIT-Surat on 10^th &11^th January 2015
75. Sharachandra Kusugal , Dr. Arunkumar P. presented & published a paper titled “Stress Analysis of Wing Root Fitting Box and Its Fatigue Life Estimation” in International Conference of Emerging Trends in Engineering, Mathematics & Applied Science (ICETEMAS-2015) , on 9^th March 2015 at Jawaharlal Nehru Engineering college, New Delhi
76. Anand A. Kulkarni, Prof. Suraj J. Patil, Dr. Jayant K. Kittur presented a paper tittled “Application of SMED Methodology – A Case Study in A Medium Scale Cast Iron Foundry” at International Conference on Advances in Production & Industrial Engineering (INCAPIE-2015), on 20^th & 21^st February 2015.
77. Murali M. Ambekar, Dr. Jayant K. Kittur presented a paper titled “A Review on Process Modelling of Metal Matrix Composites Machining & Emerging Role of Soft Computing Techniques as Modelling Tools” at International Conference on Advances in Production & Industrial Engineering (INCAPIE-2015), on 20^th & 21^st February 2015
78. Veena Badiger presented and published a technical paper titled “Investigation of Port leak in IC engines by paired comparison method” in international conference-ICETES 2015 held at Jain College, Belagavi on 24^th April 2015
79. Veena Badiger presented a technical paper titled “Resistance Spot welding of CRCA steel sheets using surface modified electrodes” in International conference- IAETSD 2015 held at Bengaluru on 07^th June 2015.
80. Satish V. Kailas & Prof. Vinayak R. Malik presented a paper titled “The role of friction in Friction stir welding” at National welding Seminar held during 22^nd to 24^th January 2015 at Jamshedpur
81. Mahesh A. Kori, Prof. Nikhil R., Dr. Shivakumar S. presented a paper titled “Fabrication Characterization & Mechanical Behaviour of Polypropylene filled with Copper Particles Processed by Injection Moulding Process” at International Conference on Recent Advances in Mechanical Engg. (ICRAME-2015) held at Raisoni College of Engg. & Management , Pune on 26^th to 28^th February 2015
82. Mahesh A. Kori, Annapurna Hosalli & Dr. Shivakumar, presented a technical paper titled “Dry sliding wear behaviour of as cast Al-30Mg 2 Si-4Fe alloy” at international conference ICPMAE , Pune on 31^st may 2015.